TM-HF SERIES | |
---|---|
Specific torque (Nm/cm3) | 15 |
Max. rotational speed (rpm) | 1300 |
Typical fields of application * | Compounding |
Plastic recycling | |
Rubber devulcanisation |
* the fields of application associated with the Series are to be considered indicative, as they depend on the formulation, viscosity of the materials and the specific process limits.
TECHNICAL SPECIFICATIONS
High specific torque
TM-HS SERIES | |
---|---|
Specific torque (Nm/cm3) | 13 |
Max. rotational speed (rpm) | 1300 |
D/d | 1.55 and 1.65 |
Typical fields of application * | Compounding |
Biomaterials | |
Bi-oriented films | |
Plastic recycling | |
Rubber devulcanisation |
* the fields of application associated with the Series are to be considered indicative, as they depend on the formulation, viscosity of the materials and the specific process limits.
TECHNICAL SPECIFICATIONS
Depending on the production process, this series can be manufactured with D/d=1.55 or D/d=1.65
TM-HT SERIES | |
---|---|
Specific torque (Nm/cm3) | 11 |
Max. rotational speed (rpm) | 1300 |
D/d | 1.55 and 1.65 |
Typical fields of application * | Compounding |
Masterbatch | |
Biomaterials | |
Bi-oriented films | |
Microporous film | |
Solvent-based adhesives | |
Hot-melt adhesives | |
Duct tape | |
Plastic recycling | |
Rubber devulcanisation |
* the fields of application associated with the Series are to be considered indicative, as they depend on the formulation, viscosity of the materials and the specific process limits.
TECHNICAL SPECIFICATIONS
Depending on the production process, this series can be manufactured with D/d=1.55 or D/d=1.65
TM-M SERIES | |
---|---|
Specific torque (Nm/cm3) | 8 |
Max. rotational speed (rpm) | 1200 |
D/d | 1.55 and 1.65 |
Typical fields of application * | Compounding |
Masterbatch | |
Biomaterials | |
Bi-oriented films | |
Microporous film | |
Solvent-based adhesives | |
Hot-melt adhesives | |
Plastic recycling | |
Reactive extrusion |
* the fields of application associated with the Series are to be considered indicative,
as they depend on the formulation, viscosity of the materials and
the specific process limits.
TECHNICAL SPECIFICATIONS
Depending on the production process, this series can be manufactured with D/d=1.55 or D/d=1.65
Corso Moncenisio, 22
10090 Rosta (TURIN) - Italy
TEL: +39 011 956 7925
FAX: +39 011 956 7987