MARIS S.p.A. rises at the beginning of 60's and starts with the production of extruders and die-cuttings for pipes and profiles.
Nevertheless, MARIS followed very carefully the growth of new polymeric products and the relevant technological developments and guessed with considerable advance the increasing importance of compounding as strategic phase in the plastic materials growth.
Therefore, at the beginning of 70's MARIS decided a total transformation by carrying out the manifacturing of co-rotating twinscrew extruders with interchangeable functional modules.
After twenty years, this compounding technology has proved to be winning one and today MARIS is one of the leading companies on the international scene.


1960   MARIS BEGINNING
1965   DESIGN AND DEVELOPMENT OF DIES FOR PIPES AND PROFILES
1970   BEGINNING OF THE PRODUCTION OF CO-ROTATING TWIN-SCREW EXTRUDERS WITH SECTIONAL ELEMENTS FOR COMPOUNDS PRODUCT
1980   EXTRUDER "L" GENERATION UP TO 150 RPM
1981   EXTRUDER "V" GENERATION UP TO 300 RPM WATER COOLER
1981   BEGINNING OF PRODUCTION OF THREE-LOBES CO-ROTATING EXTRUDERS UP TO 300 RPM FOR MASTERBATCH
1984   EXTRUDERS "LC" GENERATION
1988   EXTRUDERS "W" GENERATION UP TO 500 RPM
1989   BEGINNING OF PRODUCTION OF TWO-LOBES EXTRUDERS OVER 500 RPM FOR MASTERBATCHES AND COMPOUNDS
1990   CONTINUOS POLYMERIZATION LINES FOR POM AND BEGINNING OF PRODUCTION OF EXTRUSION REACTORS FOR STABILIZATION AND GRANULATION
1992   NEW EXTRUDER "MM" - "MW" GENERATION AT 150/300/600 RPM
1997   EXTRUDERS "HT" GENERATION UP TO 1200 RPM




 

Please read carefully the CONDITIONS indicated on the instructions concerning the use and/or acces to the site. In any case the conditions indicated are not binding and they are subject to variations or modifications at F.lli Maris discretion

Maris

F. lli MARIS S.p.A. C. so Moncenisio, 22
10090 Rosta - TORINO - ITALY
Phone: +39 011 9567925
Fax: +39 011 9567987
e-mail: info@mariscorp.com

 

web design by